Outdoor Wood Plastic Composite 3D Embossed Wall
Products Details
Name |
3D WPC Cladding |
Item |
3D LSC13010B |
Section |
|
Width |
130mm |
Thickness |
10mm |
Weight |
1850g/M |
Density |
1350kg/m³ |
Length |
customized |
Application |
Super Market,Villa,Garden |
Surface Treatment |
Brushed or Sanding |
Warranty |
10 years |
Product Feature
1:New technology 3D embossing WPC outdoor decoration cladding, decorative enhancement. 3D embossing technology is a superficial carving technique. Each cladding is the same as a sculpture, and the artistic atmosphere and visual degree have been greatly improved. Classical 3D embossing is a great improvement in seen wood-plastic cladding, which cannot only be re-engraved with the bands but also support the traces of the start barking.
2:Traditional wpc composite cladding are easy to lose grain on surface,super embossed cladding perform better than any common composite wood,it is more natural and attractive,better fading and scratching resistant.
3:Lihua’s super embossed WPC cladding have all the advantages of traditional composite wall panel ,it is still kept: waterproof, anti-UV, weather resistant, anti-corrosion,insect prevention, low maintenance, long service life etc...And the deep embossed boards look and feel more like the natural wood due to the 3D embossing treatment of the surface.
Outdoor materials include
Outdoor high fiber polyester composite wood floor series; Outdoor high fiber polyester composite wood exterior wall hanging board series; Outdoor high fiber polyester composite wood garden gallery series; Outdoor high fiber polyester composite wood sunshade series;
WPC Panel can be widely used for exterior wall panels, especially balconies and courtyards.
WPC can be widely used for exterior wall panels and floors, especially balconies and courtyards. This aspect is beyond the reach of solid wood wall panels and laminate floors, but it is where the wpc wall panel comes in. Due to the unique production process of wpc wall panels, sheets and profiles of different thicknesses and degrees of flexibility can be produced. According to needs, so they are widely used in outdoor decorative modeling.
The emergence of WPC Panel provides a new development direction for real estate developers.
In the slow recovery of the real estate market, real estate developers will rack their brains to provide consumers with personalized properties. Analysts in the industry believe that in addition to the layout and garden construction of new buildings, the exterior wall decoration will be the personality symbol of a building. The emergence of WPC Panel provides a new development direction for real estate developers. According to a report from Focus Real Estate.com, all villa projects in Guangzhou "Juli Runyuan" use WPC Panel for exterior wall decoration. It will become a new trend in the real estate market. The newly built Happy Valley in Chengdu also uses a large number of ecological wood projects, which is unique in style.
Data sheet |
|||
PRODUCT SPECIFICATION |
|||
Item |
Standard |
Requirements |
Result |
Falling mass impact resistance |
EN 15534-1:2014 Section7.1.2.1 EN 15534-5:2014 Section 4.5.1 |
None of the specimens shall show a failure |
None crack of the test specimens |
Flexural properties |
EN15534-1:2014 AnnexA EN 15534-5:2014 Section 4.5.2 |
Deflection under a load of 500N ≤5.0mm Bending strength Maximum load at fracture |
Front Face: Maximum load: Mean 1906N Deflection at 250N:Mean 0.64mm Back Face: Maximum load: Mean 1216N Deflection at 250N:0.76mm |
Swelling and water absorption |
EN 15534-1:2014 Section8.3.1 EN 15534-5:2014 Section 4.5.4 |
Mean Swelling:≤10% in thickness,≤1.5% in width,≤0.6% in length Max swelling:≤12% in thickness, ≤2% in width,≤1.2% in length Water absorption: Mean:≤8%,Max:≤10% |
Mean Swelling:2.25% in thickness, 0.38% in width,0.15% in length Max Swelling:2.31% in thickness, 0.4% in width,0.22% in length Water absorption:Mean:5.46%,Max:5.65% |
Linear thermal expansion coefficient |
EN 15534-1:2014 Section9.2 EN 15534-5:2014 Section 4.5.5 |
≤50x10⁻⁶ K⁻¹ |
Mean:46.8 x10⁻⁶ K⁻¹ |
Pull through resistance |
EN 15534-1:2014 Section7.7 EN 15534-5:2014 Section 4.5.6 |
|
Force at failure:479N,Mean value:479N,Failure mode:479N There was crack on the test specimen |
Heat reversion |
EN 15534-1:2014 Section9.3 EN 479:1999 EN 15534-5:2014 Section 4.5.6 |
|
Test Temperature:100℃ Mean: 0.09% |