Waterproof Super Embossed Composite WPC Wall Cladding
Products Details
|
Name |
3D WPC Cladding |
|
Item |
3D LSC13010B |
|
Section |
|
|
Width |
156mm |
|
Thickness |
21mm |
|
Weight |
1750g/M |
|
Density |
1350kg/m³ |
|
Length |
customized |
|
Application |
Super Market,Villa,Garden |
|
Surface Treatment |
Brushed or Sanding |
|
Warranty |
5-10 yea |
Product Feature
1:New technology 3D embossing WPC outdoor decoration cladding, decorative enhancement. 3D embossing technology is a superficial carving technique. Each cladding is the same as a sculpture, and the artistic atmosphere and visual degree have been greatly improved. Classical 3D embossing is a great improvement in seen wood-plastic cladding, which cannot only be re-engraved with the bands but also support the traces of the start barking.
2:Traditional wpc composite cladding are easy to lose grain on surface,super embossed cladding perform better than any common composite wood,it is more natural and attractive,better fading and scratching resistant.
3:Lihua’s super embossed WPC cladding have all the advantages of traditional composite wall panel ,it is still kept: waterproof, anti-UV, weather resistant, anti-corrosion,insect prevention, low maintenance, long service life etc...And the deep embossed boards look and feel more like the natural wood due to the 3D embossing treatment of the surface.
|
Data sheet |
|||
|
PRODUCT SPECIFICATION |
|||
|
Item |
Standard |
Requirements |
Result |
|
Falling mass impact resistance |
EN 15534-1:2014 Section7.1.2.1 EN 15534-5:2014 Section 4.5.1 |
None of the specimens shall show a failure |
None crack of the test specimens |
|
Flexural properties |
EN15534-1:2014 AnnexA EN 15534-5:2014 Section 4.5.2 |
Deflection under a load of 500N ≤5.0mm Bending strength Maximum load at fracture |
Front Face: Maximum load: Mean 1906N Deflection at 250N:Mean 0.64mm Back Face: Maximum load: Mean 1216N Deflection at 250N:0.76mm |
|
Swelling and water absorption |
EN 15534-1:2014 Section8.3.1 EN 15534-5:2014 Section 4.5.4 |
Mean Swelling:≤10% in thickness,≤1.5% in width,≤0.6% in length Max swelling:≤12% in thickness, ≤2% in width,≤1.2% in length Water absorption: Mean:≤8%,Max:≤10% |
Mean Swelling:2.25% in thickness, 0.38% in width,0.15% in length Max Swelling:2.31% in thickness, 0.4% in width,0.22% in length Water absorption:Mean:5.46%,Max:5.65% |
|
Linear thermal expansion coefficient |
EN 15534-1:2014 Section9.2 EN 15534-5:2014 Section 4.5.5 |
≤50x10⁻⁶ K⁻¹ |
Mean:46.8 x10⁻⁶ K⁻¹ |
|
Pull through resistance |
EN 15534-1:2014 Section7.7 EN 15534-5:2014 Section 4.5.6 |
|
Force at failure:479N,Mean value:479N,Failure mode:479N There was crack on the test specimen |
|
Heat reversion |
EN 15534-1:2014 Section9.3 EN 479:1999 EN 15534-5:2014 Section 4.5.6 |
|
Test Temperature:100℃ Mean: 0.09% |
